Bio Nil
PF
Bionil PF Pre-Cleaning
Weld and Surface Pre-Cleaning Liquid
Pre-cleaning liquid that removes fabrication contamination, oil, grease and light pitting from stainless steel and other non-ferrous metal surfaces.
View
Bio Nil
Bionil SZ Floor Cleaning Chemical
Industrial Floor Cleaner
Bio Nil· SZ
Bionil SZ Floor Cleaning Chemical
Industrial Floor Cleaner
Used to clean oil, grease and all kinds of process soils as well as tire and forklift marks on the floors of warehouses, workshops and maintenance and repair shops. Does not damage paint. Highly concentrated. Used diluted at a ratio of 1:10 to 1:100 with 60-80°C hot water. Applied to the surface with floor cleaning machines or a brush. Does not damage natural matte surfaces such as marble and granite, or epoxy painted surfaces. Does not abrade the surface.
Key Features
- Highly concentrated (economical)
- Optimized for tire and forklift marks
- Does not damage paint/marble/granite
- Compatible with industrial floor machines
Application Images
The product in application
Degreasing and cleaning chemicals catalog page
Technical Properties
Specifications
| Property | Value |
|---|---|
| Form | Concentrated liquid |
| Dilution | 1:10 - 1:100 (60-80°C water) |
| Surface compatibility | Paint, marble, granite, epoxy |
| Abrasion | Does not abrade the surface |
Material Compatibility
Concrete floorEpoxy painted floorMarble/granite (matte)Industrial floors
Usage Areas
Where is it used?
- Warehouse floors
- Workshop floors
- Maintenance shops
- Floors with tire marks
Application Procedure
Step-by-step usage
- 01
Dilute at a ratio of 1:10-1:100 with 60-80°C hot water
- 02
Apply with a floor cleaning machine or a brush
- 03
Rinse with water
Application step01 / 03
01
Dilute at a ratio of 1:10-1:100 with 60-80°C hot water
- 01
Dilute at a ratio of 1:10-1:100 with 60-80°C hot water
- 02
Apply with a floor cleaning machine or a brush
- 03
Rinse with water
Safety Warnings
- Wear PPE
Frequently Asked Questions
About Bionil SZ Floor Cleaning Chemical
How do forklift marks come off?
Forklift tire marks are a mixture of rubber + oil + floor dust and are hard to remove with conventional cleaners. The concentrated formula of Bionil SZ strips the rubber pigment; applied diluted 1:10 with hot water using a brush or floor machine, it dissolves stubborn marks.
Does it really not damage epoxy floors?
Yes. The pH and surfactant balance of Bionil SZ is designed not to dissolve the epoxy protective coating. Epoxy systems, the common floor covering of industrial warehouses and workshops, can be safely washed daily with this cleaner.
When to use 1:10 vs 1:100 concentration?
Use 1:10 (concentrated) for very heavy oil, grease and forklift marks. For general routine floor cleaning 1:50 is used, while 1:100 is sufficient for washing lightly dusty floors or daily maintenance. The right ratio balances both cost and cleaning power.
Related Products
